1. Remove cap and rinse uKeg with hot water (< 120° F).

• Repeat 3 times

2. Rinse cap and sleeve with hot water (< 120° F).

3. Shake with tap open, facing downward

• Water may or may not come out of tap.
• Repeat until water runs clean.

4. Fill with warm water under 120° F and 1 cleaning tablet.*

• Shake well.
  *Baking soda is acceptable substitute.

5. Install cap, charge briefly, flow a little water through tap, close tap.

• Let sit for 10 minutes.
• Then open tap until uKeg is empty or pressure runs out.

6. Empty bottle and rinse all parts.

• Thoroughly rinse tap lock.
• Move lock several times during rinse.

7. Allow to dry, and store with cap off and tap open in a dry place.